OEM reverse camera

Discussion around Insane Audio's super awesome new JL3001 for your JL Wrangler or JT Gladiator!
Post Reply
johnparjr
Posts: 3
Joined: Fri Jan 24, 2020 4:41 pm

OEM reverse camera

Post by johnparjr » Fri Feb 14, 2020 7:44 pm

So the camera is not as clear as it was with the OEM radio its a little grainy any way to clear it up or make it brighter

InsaneAudioSupport
Posts: 398
Joined: Mon Sep 01, 2014 1:09 pm

Re: OEM reverse camera

Post by InsaneAudioSupport » Sat Feb 15, 2020 12:15 pm

Hi, John. For the JL3001 we are re-using your OEM camera so the picture should essentially be exactly the same. Unfortunately, we have no control over the OEM camera's resolution and admittedly it isn't as sharp as, say, Insane Audio's IACAM1 or IACAM2. But this is the OEM camera. It may look a little pixalated just by virtue of the fact that we are expanding the image to a 9" screen. But it's the exact same image feed so the resolution is essentially the same.

The only other thing w'd recommend you do is to perhaps check your connections. Make sure everything is nice and clean (especially the RCA connections to your OEM camera). You may want to wrap each connection with electrical tape as well.

Please let us know!

Post Reply